Welding machine (MIG/MMA/TIG) Rogue EM 180

ESAB Rogue EM 180 is an inverter-based MIG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding.
With a weight of only 16.2 kg, 230 V single-phase input and compatibility with 10 kVA generators, this system provides maximum flexibility and portability, both in the shop and in the field.

Large 14 Segment Display –instantaneous feedback for both voltage and wire feed speed for clear viewing
Synergic Weld Programs –full range of welding parameters, 0.5 –8.0 mm with single knob control
Power Factor Correction (PFC) –ensures a stable arc, resistant to power fluctuations even while working on long extension cables up to 100 m
Unique rugged industrial design –supporting multiple lift points and cable management
Arc Dynamics –fine tune arc characteristics for a crisp/stiff arc for carbon steel or a smooth/soft arc for stainless steel
Spool Gun Ready –Rogue automatically configures set up when spool gun is connected
IP23S rated for indoor/outdoor use

Voltage: 230 VAC 1, 50/60 Hz
GMAW Welding Output:
180 A / 23 V @ 25 % Duty Cycle
116 A / 19.8 V @ 60 % Duty Cycle
90 A / 18.5 V @ 100 % Duty Cycle
SMAW Welding Output:
150 A / 26.0 V @ 25 % Duty Cycle
97 A / 23.9 V @ 60 % Duty Cycle
75 A / 23.0 V @ 100 % Duty Cycle
Current Range: 30-190 A
Voltage Range: 12-26 V
Wire Feeder Specifications: 2.0-16.5 m/min
Open Circuit Voltage: 78 VDC
Stainless Steel: 0.6-1.0 mm
Cored Wire: 0.8-1.0 mm
Aluminium: 0.8-1.0 mm
Mild Steel: 0.6-1.0 mm
Max Spool Diameter: 100 & 200 mm
Power Factor at Maximum Current: 0.8
Efficiency at Maximum Current: 82.7 %
Energy Save Mode: 20 W
Operating Temp: -10 - +40 °C
Enclosure Class: IP23S
Certification: CE
Dimensions, L x W x H: 590 x 220 x 385 mm